Troubleshooting guide
Shared Folder Not Visible on the Other PC: Check These Three Things First
Category: File Sharing
You shared a folder on one Windows PC, but the other computer on the same LAN cannot see it in Explorer or open it by UNC path.
Check the share actually exists
On the hosting PC, open Command Prompt and run net share. Look for your folder name in the list. If it is missing, the folder was never shared or the share was removed. Re-create it from the folder’s Properties > Sharing tab. If it appears with a $ at the end, it is hidden by design and will not show in Explorer; connect using \\PC-NAME\ShareName$ instead.
Confirm the other PC can reach the host
On the other PC, run ping PC-NAME. A reply confirms name resolution and basic connectivity. A failure means the PCs are on different networks or the name is wrong; try ping with the host’s IP address. If the IP works but the name does not, the problem is name resolution, not sharing.
Test the share directly by UNC path
Press Win+R on the other PC and enter \\PC-NAME\ShareName. If it opens, the share is fine and only network discovery is failing, which is common and does not block access. If you get an error, note the exact message: access denied points to permissions, while a network path error points to connectivity or the firewall.
Verification
After any change, repeat the Win+R UNC test. Success means the folder opens and files are listed. Then check that it appears under Network in Explorer.
Rollback note
If a change makes things worse, reverse it: re-enable the previous sharing setting, restore the original permission entries, or turn the firewall rule back on. Keep a note of what you changed so you can undo it cleanly.
If the share is still a windows network share not showing after these checks,

Ask for help with the exact error message and the results of each test.